At half past five the sun is down behind the rooftops and the light in the Old Town turns blue. Then, street by street, the lanterns come on. Strings of them across Nguyen Thai Hoc, clusters at shop doors along Tran Phu, a whole wall of them glowing at a stall by the river. Within half an hour the town looks the way it does on postcards. It is the right moment to ask how all those lanterns are made, and, if you have an hour, to make one yourself.
Earlier in the day the lantern makers are working in hot rooms with the light behind them. Now the work is still going on at the back of the shops, but the finished lanterns at the front are lit, and you can see both ends of the craft at once: the bare frame on the workbench and the glowing silk overhead.
A craft that came back
Lanterns have a long history in Hoi An. Tradition links them to the Chinese and Japanese merchants who settled in the port centuries ago, and they have long been hung at doorways, at temples and at festivals. But in the middle of the twentieth century the craft was in decline, along with much of the old town's trade.
It came back in the 1990s. As the Old Town was restored and visitors began to arrive, lanterns became the town's emblem, and in the late 1990s Hoi An began its monthly lantern night, when on the 14th day of the lunar month the electric lights go off and the streets are lit by lanterns alone. Our story on full-moon nights covers that evening. Demand for lanterns grew with it, and today they are made in workrooms all over town and sent across the country and abroad.

The frame
Everything starts with bamboo. A length of bamboo is split into thin strips, each one shaved and smoothed until it is even and flexible. The strips become the ribs of the lantern. They are bent into a curve and fixed at each end into a small hub, often of wood, at the top and the bottom of the lantern. The number of ribs and the curve given to them decide the shape: round, long and slender, or the familiar onion with a pointed base.
Many Hoi An lanterns are made to fold. The ribs are fixed at the hubs in a way that lets them close together like an umbrella, and a central rod or wire pushes the bottom hub up into place when the lantern is opened. It is the clever part of the design, and the reason lanterns travel so well.
Before the cloth goes on, thread is wound around the frame between the ribs to keep them evenly spaced and to hold the shape while the glue dries.

The cloth
The covering is usually silk or a silk-like cloth, chosen for the way light comes through it. Plain colours, patterned brocade and painted cloth are all used. Our story on silk explains how to tell the real thing from polyester.
The cloth is cut into panels, one for each gap between two ribs. Each panel is laid over its gap, glued along both ribs, and gently pulled taut so it has no wrinkles. Then the next one, all the way round. The glue has to be put on thinly and evenly; too much and it shows through as a dark line when the lantern is lit. When all the panels are on, the excess cloth along each rib is trimmed close with a sharp blade, and the joins are covered with a thin strip of braid or ribbon.
Finally, the lantern gets its finishing touches: a decorated rim at the top and bottom, a tassel hanging from the base, and a hook or loop for hanging. A light fitting goes inside, or a candle holder for lanterns that will be lit the old way.
20:00White rose dumplings and fried wonton

Making one yourself
Several workshops around town run short classes where you can make a lantern in an hour or two. You usually start with a ready-made frame, because splitting and shaping the bamboo takes years to learn. You choose your cloth, cut the panels, and glue them on one by one with someone at your shoulder showing you how to stretch them and where to trim. It is fiddly work. The first panel always wrinkles.
At the end you have a small lantern that folds flat, which is a better souvenir than one bought off a shelf. Ask before booking how long the class takes, what size the lantern will be, and whether it folds for packing. Prices and times change, so we give none here, and we do not name workshops.
A late-afternoon class works well: you finish just as the town's lanterns are being lit, and you can walk out into the evening with your own in a paper bag.
Buying a good one
If you buy rather than make, open and close the lantern in the shop. The ribs should move easily, the cloth should be tight and evenly glued, with no glue lines showing when it is lit, and the top and bottom fittings should be firm. Hold it up to the light. A good lantern glows evenly, without dark patches or uneven seams. Our guide to shopping without regret has more on bargaining and packing.
Lanterns sold in the busiest streets vary a lot in quality. The cheaper ones are often made quickly, with fewer ribs and thinner cloth. That is fine for a decoration, but a well-made lantern will outlast it by years.
Think about where it will hang. Silk fades in strong sun and does not like damp, so a lantern lasts longest indoors, away from a window. Dust it with a soft brush rather than a cloth. If it will hold an electric bulb, use a low-heat one and keep it clear of the silk. And if it folds, fold it the way it was opened, slowly, letting the ribs come together on their own rather than pressing them flat. Treated like that, a lantern from this town will light a room for a long time.
When the street lights fade
By half past six the sky is dark and the town is lit almost entirely by lanterns. Walk down to the river and look across to An Hoi, where the night market stalls are opening under their own strings of light. Every one of those lanterns started as a strip of bamboo and a length of cloth on somebody's workbench, earlier this afternoon or last week, in a room not far from where you are standing. The night market is the next stop.
